8
9
EN
seconds. When setting "9" is reached
the setting will not be changed further
(end stop).
If the selected cooking zone will
be switched ON by means of the
MINUS key, the cooking zone starts
at the maximum setting "9" (“reverse
switching-ON”).
When the key is continuously operated,
it decreases by 1 step every 0,4
seconds. When setting "0" is reached,
there will be no further setting changed
(end stop). Only a renewed operation
of the MINUS (or PLUS) key changes
the setting.
Switching OFF an individual cooking
zone
To switch off an individual cooking
zone, the respective cooking zone has
to be selected with the cooking-zone-
selectkey (= PLUS). The selection
is indicated with the static dot in the
respective cooking zone display. If
the control recognizes that the PLUS-
(cooking-zone-select-key is the PLUS-
key) and the MINUSkey have been
activated simultaneously the setting of
the selected cooking zone will be put
back to "0".
Alternatively, the MINUS-key can be
used to count down the setting to "0".
If all cooking zones are at "0", all decimal
points in the cooking zone displays are
blinking. If a cooking zone is "hot", "H"
will be displayed instead of "0".
Switching-OFF all cooking zones:
Immediate switching-OFF of all cooking
zones can be achieved anytime by
means of the ON/OFF key. In the
standby-mode an "H" appears on all
cooking zones which are "hot". All
other cooking zone displays are not
illuminated.
Wattage settings
The output of the cooking zones can
be set in 9 steps which are indicated by
the figures “1“ thru “9“ by means of LED
sevensegment-displays.
Automatic heat-up function
(selectable)
When the automatic heat-up function
is activated the wattage of the cooking
zone is at 100 % ED for a certain heat-
up time which is dependent on the
selected (continious) setting.
At the end of the heat-up time the
electronic control switches back to the
preselected simmering setting.
Starting process of the automatic heat-
up:
- Control is ON and a cooking zone will
be selected
-
The automatic heat-up will be
activated by operating the PLUS-key
for a second time.
- The requested continious setting
will be selected with the PLUS- and
MINUS-key, the chosen setting
appears in the display.
- 3 seconds after the last key operation
(selection of the setting) and within 16
seconds after activation of the heat-
up function, the symbol "A" (which
