22
23
EN
Electrical connection
These appliances must be installed by a
competent electrician, with all electrical
and installation requirements made
in accordance with the regulations of
the Electrical Equipment of Buildings,
published by the Institution of Electrical
Engineers. It must be connected to the
electrical supply by a multipole switch
with minimum 3 mm contact to contact
gap. All current and earth conductors
must be of an appropriate size.
This product must be earthed and
fused in accordance with current
rating of appliance (compulsory
provision according to law).
Before fitting please ensure that
voltage indicated on the rating plate
corresponds to the mains voltage of
your home.
The rating plate provides information
on Model Number, Serial Number,
voltage rating, power and frequency of
this appliance.
No liability for damage or injury to
persons or property will be accepted
arising from non-observance of
these requirements. If the supply
cord is damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified per-sons
in order to avoid a hazard.
The main cable must be of the right
size, in compliance with the power of
the hob (see plate and the following
table), elastic with insulation in rubber
of HO5RR-F or HO5RN-F type and of
a length allowing the extraction of the
appliance from the worktop.
