12
13
EN
increase of the variation speed up to
a max value, without acoustic signals
• If the clock key (or MINUS) is released,
the increase (decrease) speed starts
again from the initial value.
• The timer can be set both with
continuous operation of the clock key
or MINUS or with successive-touch
operation (with acoustic signal).
After the timer is set the time runs
down according to the adjustment.
When the time is over there is a sound
signal and the timer display blinks.
The sound signal will be stopped
• automatically after 2 minutes and/or
• by operating any key.
Then the blinking of the timer display
stops and the display extinguishes.
Switching-OFF/changing the timer
• The timer can be changed or switched
off at any time by operating the clock
key or MINUS (with acoustic signal).
The timer switches off, bringing the
time to "0" with the MINUS key or
operating the clock key and MINUS at
the same time, which takes the timer
directly to "0". For 6 seconds, the
timer remains on "0" before switching
off.
• If the control will be switched-ON by
means of the Power-key, the stand-
alone timer will be switched-off also.
Timer programming on cooking
zones
When the control is switched-ON an
independent timer can be programmed
for every cooking zone.
• By selecting a cooking zone with
the cooking-zone-selectkey, then
selecting the setting and finally
activating the timerselect-key, the
timer can be programmed as a switch-
off function for a cooking zone.
Around the timer four LEDs are
arranged. These indicate for which
cooking zone the timer has been
activated.
• As soon as the timer has been
selected, the assigned timer-LED
blinks and the dot in the timer display
glows. If a cooking-zone-select-key
will be operated, the dot in the timer
displays extinguishes and the LED
does not blink any longer.
•
When switching-over from one
cooking zone to another, the timer
display always shows the present
timer value of the respective cooking
zone.
However, the programmed timers of
other cooking zones remain active.
•
The further setting behaviour
corresponds to the STANDALONE-
TIMER. For increasing the adjusted
time, the PLUS-key of the respective
cooking zone has to be used. (setting
π
"0")
• When the timer has run down, there is
a sound signal and the timer display
shows "00" statically, the assigned
cooking zone timer LED blinks. The
programmed cooking zone will be
