10
11
EN
• When the control is switched- ON
the ON/OFF-key has priority over all
other keys, so that the control can be
switched-OFF anytime, even in case
of multiple or continous operation of
keys.
• In the stand-by mode a continous
operation will not be signalized.
However, before the electronic control
can be switched-ON again, it has to
recognize that all keys are not operated.
Key lock (child safety feature)
◊
Child safety feature:
Key lock:
After switching-ON the control the
child safety feature can be activated.
To achieve this it is necessary to
simultaneously operate the front right
cookingzone- select-key and the
MINUS-key and then press the front
right cooking-zone-selectkey again.
There will be an "L", meaning LOCKED
(child safety feature against unintended
switching-ON). If a cooking zone is in
the "hot" condition, "L" and "H" will be
displayed in alternation.
This course of operation has to take
place within a period of 10 seconds, no
other key than described above may be
operated. Otherwise the input will be
interrupted because of incompleteness,
the cooktop will not be locked then.
The electronic control remains in a
locked condition until it gets unlocked,
even if the control has been switched-
OFF and -ON in the meantime. Also
a reset of the control (after a voltage
drop) does not cancel the key lock.
Unlocking for cooking purposes:
To unlock and operate the control
it is required to operate the front
right cooking-zoneselect- key and
the MINUS-key simultaneously. "L"
(LOCKED) in the display extinguishes
and all cooking zones show "0" with
a blinking dot. Should a cooking zone
be "hot", "H" is displayed instead of
the static "0". After switching-OFF the
control, the child safety feature is active
again.
Cancelling the key lock:
After switching-ON the control the child
safety feature can be deactivated.
Here it is necessary to simultaneously
operate the front right cooking-zone-
selectkey and the MINUS-key and then
operate the MINUS-key alone. If all
steps have been carried out in the right
order within 10 seconds the key lock
gets cancelled and the control is OFF.
Otherwise the input will be considered
incomplete, the control remains locked
and switches-OFF after 20 seconds.
After a renewed switching-ON by
means of the ON/OFF key all displays
show "0", the display dots are blinking
and the control is ready for cooking.
If a cooking zone is "hot" , "H" will be
displayed instead of the static "0".
Multi-circuit cut-off
Depending on the design it is possible
to operate dual- or triple-circuit radiant
heating elements with the LITE-Touch
Control.
When a multi-circuit heating element is
put into operation, all heating circuits
