Fukuda VaSera VS-2000 Series, Operation Manual

Page: 69 / 234

2-19
Chapter 2 Installation
2)
Set [Network Printer] to [ON] if using a
network printer.
3)
Enter the IP address and port number.
4)
Touch [Enter] after configuring the settings.
5)
Select [Equipment Control] - [Print on
Normal Paper] - [Output Target] and then
select [Network Printer] or [PC Printer].
■
Example Setting: For "Example of Network Configuration" (P2-16)
Example network settings on the device
If connecting two or more of this device to the same network, set a different IP address for each device ("192.168.0.1" and
"192.168.0.2", etc.)
Example host device information settings
• If installing multiple host programs on the same PC, set a different port number for each program.
• A pulse wave host is a host for recording and reading examination data for pulse wave examinations.
• A patient information host is the master ID communication host if "VS-PC" is selected as the location from which to
load patient information.
• Select [Communication]-[DMS Settings]-[Read Patient Info From] and then select [VS-PC] if using VSS as the master
ID communication host.
Item Description
IP Address 192.168.0.1
Sub-Network Mask 255.255.255.0
Default Gateway 192.168.0.3
Item Description
Host name VSS
IP Address 192.168.0.3
Port No. Pulse wave host 8192
Patient information host