Fukuda DYASCOPE 8000 Series, Operation Manual

Page: 92 / 349

6-2
Chapter 6 Admit/Discharge Admit
Entering the Patient Information
Enter the patient's information.
1
Patient ID.
Up to 20 characters of alphabets, numbers, or symbols can be used.
After entering the ID, press the [Set] key. If the [Set] key is not pressed, the entered ID will not be finalized.
(

"To Enter Characters" P4-9)
2
Patient Name
Up to 16 characters of alphabets, numbers, or symbols can be used.
The entered name will be displayed on the home display. (

"To Enter Characters" P4-9)
3
Birth Date/Age
There are two ways to enter the patient's age. One is to enter the birth date which will automatically calculate
the age, and the other is to directly enter the age using the numeric keypad. If [Neonate] is selected for patient
classification, age will be displayed in days.
4
Height/Weight/BSA
The BSA (Body Surface Area) will be automatically calculated from the height and weight.
5
Admit Date/Time
The patient's admit date/time will be displayed.
The admit date/time can be changed when a data server is used through the TCP/IP network.
(For data server setup,

Maintenance Manual "Data Server" P2-22)
6
Bed Name
Select the bed name from the displayed list.
The bed name displayed in gray indicates that it is already used by other bed.
The bed name displayed in blue indicates that it is selected for that bed. The bed names need to be registered
in advance on the "Initial Settings".
(

Maintenance Manual "Bed Name Registration" P7-30)
WARNING
 When using the PHS nurse call system, make sure to set the "Bed Name" as it will be
used for alarm notification to the PHS. If the "Bed Name" is not set, the patient cannot be
specified on the nurse call system.
1
2
3
4
5
6
7
8
9
10
11
12