Fukuda DYASCOPE 8000 Series, Operation Manual

Page: 91 / 349

6-1
Chapter 6 Admit/Discharge What You Can Do on the Admit/Discharge Menu
Chapter 6 Admit/Discharge
What You Can Do on the Admit/Discharge Menu
Before starting monitoring, patient information can be entered.
When the patient leaves the bed for a long period of time, monitoring can be suspended to temporary cease the
measurement and alarm generation.
1
On the Individual Bed Display, press the [Menu],
[
] (Admit/Discharge) keys.
 The "Admit/Discharge" screen will be
displayed.
Enter the patient information.
2
Monitoring can be suspended by pressing the
[Monitor Suspend] key.
3
Monitoring data of the patient can be deleted by
pressing the [Discharge] key.
CAUTION
 When a patient is discharged, delete the patient's monitoring data by performing the
discharging procedure. If monitoring of new patient is started without performing a discharge
procedure of the previous patient, new data will be added to the previous data which will
result in inaccuracy.
 If monitoring is suspended on the bedside monitor, the data for that patient will not be
transmitted to the central monitor. When monitoring is resumed on the bedside monitor, the
data transmission to the central monitor will also resume.

Before monitoring, make sure the current alarm setting is suitable for the patient's condition.
Admit
Enter the following patient information before starting monitoring. This is called "Admit" process.
Patient ID Patient Information (Sex, Birth Date, Age, Height, Weight, BSA)
Name Patient Classification (Adult / Child / Neonate)
Nurse Team Pacemaker (Used / Not Used)
2
3