Fukuda DYASCOPE 8000 Series Page 77 Operation Manual Download

Page: 77 / 349

4-7

Chapter 4 Basic Operation

Operation on the Window

3 Page Switch Key

These keys will appear when the setup items or display data are on multiple pages. The currently displayed
page is indicated by "●".

4 Pressing the

(Return) key will return to the previous window.

5 Pressing the

(Upper Level) key will return to the upper level display.

To Minimize/Restore the Window

To temporarily display the home display during the setup, press the

(Minimize) key. The current window will

be minimized. By pressing the minimized window, the window will be redisplayed.

Press the

(Minimize) key.



The window will be minimized.

Press the minimized window.



The original window will be displayed again.

NOTE



Maximum of 8 windows can be minimized. If exceeded, the oldest window will be deleted.



To delete all minimized window, press the [Delete All] key which will be displayed when

is pressed for more than 0.5 second.

Summary of Contents for DYASCOPE 8000 Series






























































































































































































































































































































































Search results

Summary of Contents for DYASCOPE 8000 Series

Reviews:

Related manuals for DYASCOPE 8000 Series

Brands by name

Popular brands

Fukuda DYASCOPE 8000 Series, Operation Manual

Search results

Summary of Contents for DYASCOPE 8000 Series

Reviews:

Related manuals for DYASCOPE 8000 Series

Brands by name

Popular brands