Fukuda DYASCOPE 8000 Series Page 51 Operation Manual Download

Page: 51 / 349

2-1

Chapter 2 Name of Parts and Their Functions

Chapter 2 Name of Parts and Their

Functions



Front Side

1 Remote Control Sensor

Receives the infrared remote control signal.

2 Alarm Indicator

Notifies the alarm by flashing.
The flashing pattern can be changed.

3 LCD Touch Panel

Displays the waveforms and numeric data in
various formats. The operation can be
performed using the touch panel.

4 Power Supply LED

Indicates the power supply status. Lights when
the AC power is supplied and main power
switch is turned ON.

Green: In normal operation
Red: Operation error
Light OFF: AC power is not supplied or main
power supply switch is turned OFF.

5 Alarm Silence Key

Temporarily silences the alarm sound
generated on all the beds.

6 Home Key

Displays the home display.

7 Speaker

Generates the alarm sound and key sound.

Summary of Contents for DYASCOPE 8000 Series






























































































































































































































































































































































Search results

Summary of Contents for DYASCOPE 8000 Series

Reviews:

Related manuals for DYASCOPE 8000 Series

Brands by name

Popular brands

Fukuda DYASCOPE 8000 Series, Operation Manual

Search results

Summary of Contents for DYASCOPE 8000 Series

Reviews:

Related manuals for DYASCOPE 8000 Series

Brands by name

Popular brands