manualshive.com logo in svg

Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 263 / 349

Share
Download
Fukuda DYASCOPE 8000 Series Operation Manual Download Page 263

13-33

Chapter 13  Menu Items

Display Configuration of the Home Display

Whether or not to display the ST value, VPC (integrated value of 1 minute), arrhythmia alarm message 
inside the HR numeric data box can be selected.

2

Alarm Limit Display

The alarm limit display inside the numeric data box can be selected from [Graph] / [Numeric] / [OFF].

When [Graph] is selected, SYS alarm limit will be displayed for BP numeric data box.

When [Numeric] is selected, the alarm limit for the parameter with the alarm turned OFF will not be 
displayed regardless of this setting.

3

At Alarm Occurrence

How to display the numeric data box at alarm occurrence can be set.

[Reversed]: The numeric data display will alternately change between standard display and reversed 
(highlighted) display.

[3D]: The numeric data display will alternately change between standard display and 3D display.

4

Display Priority

On the "Numeric Data Display Priority Window" 
(shown on right), the display priority of the parameter 
can be set.
When the quantity of numeric data box is changed, 
the display will change according to this display 
priority.

1

First, select the priority from 1 to 72 under "New 
Priority", and then select the parameter from the 
right.

2

Pressing the [Add] key will insert the parameter to 
the specified priority order, and the priority of the 
subsequent parameters will move down.

3

Pressing the [Delete] key will delete the parameter, 
and the priority of the subsequent parameters will 
move up.

4

[OK]: The settings will be finalized.

5

[Cancel]: The settings will be cancelled.

5

Waveform Display Settings

1

Circulatory Waveform Sweep Speed

Select the ECG/BP/SpO

2

 sweep speed from [12.5] / [25] (mm/s).

2

Respiratory Waveform Sweep Speed

Select the RESP, CO

2

 sweep speed from [6.25] / [12.5] / [25] (mm/s).

3

Grid

The grid display on the ECG waveform background can be set.

[ON]: Grid will be displayed.

[Bold]: Grid will be displayed in bold format.

[OFF]: Grid will not be displayed.

4

Scale

The scale can be selected from [ON]/[Bold1]/[Bold2].

5

Thickness

1

2

3
5

4

Summary of Contents for DYASCOPE 8000 Series






























































































































































































































































































































































Reviews:

No comments