v
Safety
Precautions about the Network System
Precautions about the Management
The institution appoints a person to manage the wireless channels for the whole medical institution. And when
using telemetry which requires zone location, the Institution should nominate a person to manage the wireless
channels in each zone (a "Zone Manager" ). However, when using such telemetry in a local medical institution,
one person can perform both functions.
Select a telemetry manager who understands the characteristics and functionality of telemetry systems, and is
skilled in operating telemetry.
When installing telemetry, the Overall Manager and the Zone Manager have to understand the precautions for
use of the telemetry in advance.
The Overall Manager takes responsibility of wireless channel management and transmitter storage for the
whole Institution by giving proper instruction.
The Overall Manager should create a management log (hereinafter referred to as the "log" ), which contains a
list of the management status of the wireless channels for the whole Institution. When changing a wireless
channel, register it in the log and give proper instructions to the Zone Manager or to the user.
The Zone Manager assumes responsibility for managing the wireless channels, storing, and managing
telemetry.
The Zone Manager assigns the transmitter to the user, and provides enough education for use inside the zone.
The telemetry user verifies operation of the transmitter/receiver before use.
The telemetry user, if using the telemetry in a zone location, follows the instructions of the Zone Manager for
the zone and gives instructions to the patient if required.
When interference or breakdown occurs in telemetry communication, the user is required to inform the zone
manager and the overall manager of the problems. The Zone Manager and Overall Manager are to deal with
the problem properly and/or contact their nearest Fukuda Denshi representative for service.
Bidirectional Wireless Communications Module (TCON)
Precautions about the Installation
The medical institution (hereinafter referred to as "Institution" must execute investigation required to prevent
interference including types of radio waves, frequencies, and antenna power if wireless equipment is already
installed and being used in the facility.
Even if this equipment is installed within the range of radio communication, the communication may not be
possible due to noise or multi-path phasing etc. This should be fully considered when using the TCON network.
If the TCON is installed in a line-of-sight distance where there are no obstacles or on the upper floors,
unexpected long distance transmission may occur which may cause interference with nearby medical
institution. Before using the TCON system, test the reception to make sure that it does not interfere with other
channels. If the channel is used by other medical institution, change the channel ID.
Do not install the TCON system in an area where it will be subject to splashing water. Water entering the
equipment may cause the equipment to malfunction or be damaged.
Precautions about the Management
The Institution should appoint a person (hereinafter referred as the "Overall Manager" to manage the wireless
devices for the whole facility. The ME engineer is appropriate for the Overall Manager.
When installing TCON, the Overall Manager has to receive an explanation of the precautions for use of the
TCON from the manufacturer or sales representative.
The Overall Manager is responsible for the maintenance and storage of the equipment.
The Overall Manager should create a management log (hereinafter referred to as the "log"), which contains a
list of the management status of the wireless channels for the whole Institution. When changing a wireless
CAUTION
CAUTION
CAUTION
Summary of Contents for DYASCOPE 8000 Series
