Fukuda DYASCOPE 8000 Series, Operation Manual

Page: 213 / 349

12-1
Chapter 12 Printing Types of Printing and Output Printer
Chapter 12 Printing
Types of Printing and Output Printer
This section explains the procedure to output the monitoring data to the HR-800 Recorder Unit or to the laser printer
(A4 size paper) connected to the TCP/IP network.
There are following types of printing.
NOTE
 The laser printer setup should be performed by Fukuda Denshi service representative or
system administrator of your institution.
(

Maintenance Manual "Laser Printer" P2-21)
 The data of the DS-8500 system bedside monitor (from version 6) can be output to the laser
printer connected to this central monitor. For details of the corresponding bedside monitors
and their software versions, refer to your nearest service representative.
 When printing operation is performed from the DS-8500 system (from version 6), the printing
will be output on the central monitor with the smallest central ID.
For example, if the bedside monitor "BED-001" is monitored on 3 central monitors, "CNT-
Printing Types
Output Printer
Recorder Unit
HR-800
Laser Printer
(A4/Letter)
Waveform Printing
Manual Printing ○ x
Alarm Printing ○ x
Periodic Printing ○ x
Telemetry Remote Printing ○ x
Freeze Printing ○ x
Recall Printing ○ ○
12-lead Waveform Printing ○ ○
Full Disc. Wave, Compressed Wave
Printing
○ ○
Full Disc. Wave, Zoom Wave Printing ○ ○
Graphic Printing
Graphic Trend Printing ○ ○
Recall List Printing x ○
NIBP List Printing ○ ○
ST Printing ○ ○
12-Lead Analysis Result Printing ○ ○
All Beds Alarm Settings Printing x ○
All Beds Alarm Event Printing x ○
All Beds Nurse Call Settings Printing x ○
Text Printing
Tabular Trend Printing ○ ○
Hemodynamics Printing ○ ○
Alarm History Printing ○ ○
○: Printing can be performed. x: Printing cannot be performed.