Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 186 / 349

9-20
Chapter 9 Data Review Searching/Displaying the Discharged Data
Searching/Displaying the Discharged Data
If the patient has been discharged without setting the patient ID, the data will not be displayed on the past data list,
and in such case, search function can be used. The past data can be searched by patient ID or patient name.
1
Press the [Menu], [Past Data] ("Data Review") on the individual bed display, and display the past data search
menu.
2
Search the data.
 Select the searching item from patient ID or patient name.
 Enter the searching characters, and press [Search].
REFERENCE
 The past data will be searched with exact match condition.
Ex.) If the patient ID "123" is searched, only the patient ID "123" will be searched, and
patient ID "12345", "1123", etc. will not be searched.
 The past data can be searched in blank condition (without entering search characters).
Ex.) If the patient ID is searched in blank condition, the past data which the patient ID was
not set will be displayed.
 When the central monitor communication function is used, the past data of the
corresponding patient saved on the central monitors on the network will be displayed.