manualshive.com logo in svg

Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 174 / 349

Share
Download
Fukuda DYASCOPE 8000 Series Operation Manual Download Page 174

9-8

Chapter 9  Data Review

Tabular Trend

Tabular Trend

This section explains the tabular trend function and printing procedure.
The 120 hours of data in 10 sec. / 30 sec. interval will be automatically stored and displayed as tabular trend data.

Displayed Items

Press the [Menu], [Tabular Trend] ("Data Review") on the individual bed display.

      NOTE

The red background will be displayed for the alarm generated parameter.
The alarm display for the expiratory and inspiratory parameter such as EtCO

2

 and InspCO

2

 

will be the same.
For example, if the alarm is generated for BP-S, the background color of BP1-S, BP1-M, 
BP1-D will be displayed in red.

If the display resolution is higher than the minimum resolution of the data, the same data is 
repeated to match the display resolution.

The data resolution differs according to the parameter as shown below.

1

Time Bar

 (

"Common Operation" P9-1) 

2

Numeric Data List

The numeric data will be displayed.
The alarm generated data will be displayed with red background.
On the left side of the parameter, the color assigned for the corresponding parameter will 
be displayed.

3

Scroll Parameter

If all the parameters are not displayed, the display can be scrolled.

4

Other Review Data Display

 (

"Common Operation" P9-1) 

Data Resolution

Minimum Resolution

Parameter

10 sec.

HR, ST, SpO

2

, SpO

2

-2, PR_SpO

2

, PR_SpO

2

-2, BP1, BP2

30 sec.

Other than above

1

2

3

4

Summary of Contents for DYASCOPE 8000 Series






























































































































































































































































































































































Reviews:

No comments