Fukuda Denshi LX-7230, Operation Manual

Page: 65 / 112

45
7. Measurement
Turn ON the power and the measurement starts.
■
Starting Screen
When the power is turned ON, the channel number configured on the LX-7230
is displayed at the top of the LCD.
Make sure whether the channel number on the
LCD matches the channel number indicated on
the label of the LX-7230 and the channel number
configured on the receiving monitor.
This screen automatically moves onto the next
waveform display screen.
■
Waveform Display Screen
ECG waveform (1CH when using 3-electrode lead cable, 2CH when using
other lead cable), heart rate, pacemaker marker, respirogram, respiration rate,
pulse wave, SpO
2
measurement value, remaining battery level, and various
messages are displayed.
CAUTION
 The LX-7230 does not have a diagnostic function. Check the diagnostic
function on the receiving monitor.
 The LX-7230 does not have an alarm function. Check the alarm function
on the receiving monitor.
 The ECG waveform size and sweep speed settings displayed on the
LCD of the LX-7230 do not interface with the ones displayed on the
screen of the receiving monitor.
 The heart rate and respiration rate displayed on the LCD of the LX-7230
may be different from the ones displayed on the receiving monitor.
Because the algorithm of the ECG and respiration rate is different.