Fukuda Denshi Dynascope 8000 Series, Maintenance Manual

Page: 9 / 154

i
Preface Introduction
Preface
Introduction
Thank you for purchasing this product. Read the "Safety Precautions" thoroughly before use to ensure correct and
safe use of the product.
Before using or installing this product, read this manual thoroughly.
Important Notice
For Safe Operation of the Equipment
(1) Before using this equipment, read this operation manual.
(2) Fukuda Denshi cannot predict all the dangers which may be caused by misusage of this product or
environmental condition.
(3) For using this equipment, there are many items that "should be performed", "should not be performed", and
"cannot be performed". It is not possible to cover all these items in this manual or warning labels. Therefore, it
is necessary to also follow the general safety precaution other than the items described in this manual.
(4) To prevent accidents, usage other than intended, or usage, cleaning, and maintenance not described in this
manual should not be performed.
(5) When using this equipment, follow the respective regulation to minimize the probability of accidents.
Intended Use of this Equipment
This equipment is designed for the following <Intended Use>.
<Intended Use>
This equipment is intended for patient monitoring in surgery room, ICU, ward, emergency room or during
transportation in the medical facility by measuring parameters such as ECG, respiration, NIBP, pulse rate, SpO
2
,
SpCO, SpMet, SpHb, pulse wave, temperature, BP, CO, respiration gas (CO
2
concentration), BIS, SQI, SR, EMG,
EEG, and monitors patient condition by displaying/recording the measurement data on this equipment or central
monitor and generates alarm as required.
This equipment is intended for monitoring one patient. It is not intended for monitoring multiple patients.
The 12-lead ECG analysis function is intended for adult and pediatric patients.
For specification of this equipment, refer to "Chapter 14 Specification" of this manual.
This equipment is intended to be used by healthcare professionals. Users should have a thorough knowledge of the
function and operation before using this equipment. The maintenance of this equipment should be performed by
skilled personnel who received a training of possible hazards and measures to avoid those hazards. Also, your local
regulation must be followed. If this equipment is used for the purpose other than intended, or if the user does not
follow the safety instructions, the following hazard may result.

Hazard to the Life and Health of the Patient or the User