Fukuda Denshi DSL-8001, Service Manual

Page: 127 / 150

Storage
This section explains how to store the equipment and recording paper.
Storing the Equipment
y Store in a place where the equipment will not be exposed to splashing water.
y Store in a place where the equipment will not be adversely affected by atmospheric pressure,
temperature, humidity, ventilation, sunlight, dust or atmosphere containing salt or sulfur.
y Store in a level area where the equipment is not exposed to vibration and shock (including
transportation).
y The following environmental conditions should be observed when storing the equipment.
Storage Temperature: -20 to 60
°
C
Storage Humidity: 10 to 95% (60ºC, non-condensing)
Atmospheric Pressure: 500 to 1060 hPa
Storing the Recording Paper
This equipment utilizes thermal recording paper. If placed in a high temperature for long period of
time, the print may become indistinct, and unable to read. When storing, follow the precautions
below.
y Store in a place where light is shut off and avoid direct sunlight.
y Do not leave the paper in high temperature (50ºC or 122ºF or above).
y Do not store the paper in polyvinyl chloride bag.
y Do not expose the paper to alcohol, hydrochloric acid, or ester and ketone solvents.
y
Avoid using adhesive agents other than water based glue.
9 － 13