Fukuda Denshi DS-7001, Service Manual

Page: 103 / 151

Language Setup
When the power of the DS-7001 is turned ON for the first time after the factory shipment, the
language setup screen will be automatically displayed. Once the setup is performed, this
setup screen will not be displayed again from the next time the power is turned ON, but if
necessary, the setup can be performed again from the “Test Menu” or by using a special
procedure.
Reference For special procedure to set the language, refer to “3. Preparation Before Use”.
Language
English or Chinese can be selected for the language.
1 Select “Language” on the “Test Menu”.
Language: Select
English
or
Chinese
and press the
Save key.
If not setting the language, select Skip .
When the
Save
key is pressed, the screen shown at left
will be displayed.
When the language setup process completes, “Setup
Completed.” message will be displayed and the system will
restart after 3 seconds.
5 － 25