Fujitsu stylistic q616 Operating Manual Download

Page: 42 / 111

Working with the Tablet PC

Inserting the memory card

►

Open the slot cover (1).

►

Carefully slide the memory card into
the slot (2). The label area must be
facing downward. Do not apply any
force, otherwise the delicate contact
surfaces could be damaged.

Memory card

►

Close the slot cover.

Removing the memory card

Memorycard

To avoid any loss of data, always follow the correct procedure for removing the
card (see the documentation for your operating system).

►

Open the slot cover (1).

►

Press the edge of the memory card so
that the memory card jumps (2) slightly
out of the slot (a).

►

Pull the memory card out of the slot (a)
in the direction of the arrow (3).

►

Close the slot cover.

Fujitsu

Summary of Contents for stylistic q616
















































































































Search results

Summary of Contents for stylistic q616

Reviews:

Related manuals for stylistic q616

Brands by name

Popular brands

Fujitsu stylistic q616, Operating Manual

Search results

Summary of Contents for stylistic q616

Reviews:

Related manuals for stylistic q616

Brands by name

Popular brands