Fujitsu SPARC M10-4, Service Manual

Page: 263 / 514

XSCF>
testsb -v -y -s 00-0
XSCF>
testsb -v -y -p 00-0
mounted, into the physical partition.
For details, see " 6.2 Incorporating a Chassis into a Physical Partition ."
3.
Close the rack door.
12.6.3 Inactive/Hot maintenance
1.
Log in to the XSCF shell.
2.
Execute the testsb command to confirm that the internal disk requiring
maintenance is recognized.
When you add the "-y" option to the testsb command, the system automatically
answers "y" (yes) in response to an inquiry.
The following example shows the diagnosis of system board 00-0.
During the diagnosis processing, the probe-scsi-all command of the OpenBoot
PROM is executed, and the result is displayed.
3.
Power on the physical partition requiring maintenance.
For details, see " 6.3 Powering On the Physical Partition Requiring Maintenance ."
4.
Close the rack door.
12.6.4 System-stopped maintenance
1.
Log in to the XSCF shell.
2.
Execute the testsb command to confirm that the internal disk requiring
maintenance is recognized.
When you add the "-y" option to the testsb command, the system automatically
answers "y" (yes) in response to an inquiry.
The following example shows the diagnosis of system board 00-0.
During the diagnosis processing, the probe-scsi-all command of the OpenBoot
PROM is executed, and the result is displayed.
3.
Start the entire system.
For details, see " 6.4 Starting the Entire System ."
4.
Close the rack door.
Chapter 12 Maintaining the Internal Disks 239