Fujitsu SPARC M10-1, Service Manual

Page: 34 / 230

A
Table 2-6 Status of the system locator
Icon Name Color Status Description
CHECK Amber On An error that prevents the system from
starting has been detected.
Blinking
(*1)
Indicates that the chassis requires maintenance
(this function is also referred to as the
"locator").
Off The system is in the normal state, or the
power is disconnected or otherwise not being
supplied.
*1 The blink interval is 1 second (1 Hz).
Table 2-7
LEDs on the motherboard unit and their states
Name Color Status Description
READY Green On Indicates that the component is operating. The
component cannot be released and removed from
the system.
Blinking
(*1)
Indicates that the component is currently being
mounted on the system or being disconnected
from the system.
Figure 2-8
Location of the system locator
2.3.3 LEDs on each component
Each component incorporates LEDs. These LEDs indicate a component that requires
maintenance if that component experiences a failure. Start maintenance after
checking the LEDs.
The LEDs on each component and the states that they indicate are as follows:
Fujitsu M10-1/SPARC M10-1 Service Manual
･
November 2014 18