Appendix A
Fixed Issues
123
The Solaris 10 OS always names the node as
storage@
n
. Therefore, the storage
device with a subclass of 2, 3, or 4 (SPARC Enterprise T5120 and T5220 must be 2)
cannot boot with Solaris 10 OS DVD.
Workaround: Use the drive whose subclass is not 2, 3, or 4 as the replacement.
The
prtdiag
-v
Command Has Formatting
Issues (CR 6587389)
This issue is resolved for servers running the Solaris 10 5/08 OS and later. If you are
running Solaris 10 8/07, you can fix this issue with patch ID 127127-11 or later.
Some of the information displayed by the
prtdiag
(1M) command is difficult to read
when the
-v
option is used. White space is missing between the first and second
fields in the report.
The following formatting issues are displayed in the
prtdiag
-v
command output:
■
Fans sensors
– Missing spaces tab between Location and Sensor columns.
■
Temperature sensors
– DIMMs missing spaces tab between Location and Sensor
columns.
■
LEDs
– Location missing for SERVICE, LOCATE, ACT, PS_FAULT, TEMP_FAULT,
and FAN_FAULT DIMMs. Missing spaces tab between Location and LED.
■
Locations of sensors – have the first portion of their location truncated, resulting
in no location being reported for some items such as system status LEDs.
To see this formatting information, use the
showenvironment
command in the
ALOM CMT compatibility CLI:
0x08
5
Any
storage
0x08
6
Any
storage
0x08
Any
Any
storage
sc>
showenvironment
-
displays the system environmental status
TABLE :
1275 USB Bindings Rules for Naming Nodes
(Continued)
bInterface Class
bInterface Subclass
bInterface Protocol
Name
