110
SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
In the Output From the
prtdiag
Command,
Warnings May Be Displayed (CR 6821325)
This issue is resolved by updating the system firmware to 7.2.7.b or later.
In the output from the
prtdiag
command, warnings may be displayed for input
voltage sensors(V_IN_MAIN) on power supply units.
Workaround: None. Ignore this issue because it is only a display error.
Voltage sensors:
------------------------------------------------------------
Location Sensor Status
------------------------------------------------------------
SYS/MB/CMP0/MR0 V_VMEM ok
SYS/MB/CMP0/MR0 V_+1V5_VDD ok
SYS/MB/CMP1/MR1 V_VMEM ok
SYS/MB/CMP1/MR1 V_+1V5_VDD ok
SYS/MB V_+3V3_STBY ok
SYS/MB V_+3V3_MAIN ok
SYS/MB V_+12V0_MAIN ok
SYS/MB V_VDDIO ok
SYS/MB V_VCOREL ok
SYS/MB V_VCORER ok
SYS/MB V_+1V5_IO ok
SYS/MB V_VMEML ok
SYS/MB V_VMEMR ok
SYS/MB V_VBAT ok
SYS/PS0 V_IN_MAIN warning (-48volts)
SYS/PS0 V_OUT_MAIN ok
SYS/PS1 V_IN_MAIN warning (-48volts)
SYS/PS1 V_OUT_MAIN ok
