Fujitsu SPARC ENTERPRISE T1000, Installation Manual, Page: 74 / 84

48 SPARC Enterprise T1000 Server Installation Guide • April 2007
■ disk
– Specifies the system boot disk (internal disk 0 by default)
■ disk0
– Specifies internal drive 0
■ net
,
net0
,
net1
– Specifies the network interfaces
■
full path name – Specifies the device or network interface by its full path name.
Note – The Solaris OS modifies the
boot-device
variable to its full path name, not
the alias name. If you choose a nondefault
boot-device
variable, the Solaris OS
specifies the full device path of the boot device.
Note –
You can specify the name of the program to be booted as well as the way the
boot program operates. For more information, refer to the OpenBoot 4.x Command
Reference Manual for your specific Solaris OS release.
If you want to specify a network interface other than an on-board Ethernet interface
as the default boot device, you can determine the full path name of each interface by
typing:
The
show-devs
command lists the system devices and displays the full path name
of each PCI device.
ok show-devs