Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 371 / 560

showcodusage(8)
System Administration 347
NAME
showcodusage - display the current usage statistics for Capacity on Demand (COD)
resources
SYNOPSIS showcodusage [
-v
] [
-M
] [
-p resource|domain|all
]
showcodusage
-h
DESCRIPTION
showcodusage
(8) shows current information about COD Hardware Activation
permits in use.
The
showcodusage
(8) command is not available on the M3000 server.
By default, this command displays a summary of COD permits used and installed,
along with the current state of each resource. When used without options, it
displays the current usage.
Privileges
You must have one of the following privileges to run this command:
Refer to
setprivileges
(8) for more information.
OPTIONS
The following options are supported:
platadm
,
platop
,
fieldeng
Can run this command for all resources and domains.
domainadm
,
domainmgr
,
domainop
Can run this command for available resources only for those domains that
you can access.
-h
Displays usage statement.
When used with other options or operands, an error occurs.
-M
Displays text by page.
-p domain
Displays permit usage for each domain. The statistics reported
include the number of COD permits used by the domain, resources
assigned to the domain, and COD permits reserved for the domain.
-p resource
Displays permit usage by resource type.
-p all
Displays all COD usage information.
-v
Specifies verbose output. Displays all available COD usage
information, including COD permit use for both the system and its
domains.