Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 349 / 560

showarchiving(8)
System Administration 325
NAME
showarchiving - display log archiving configuration and status
SYNOPSIS showarchiving
showarchiving [
-e
] [
-v
]
showarchiving
-h
DESCRIPTION
showarchiving
(8) displays the status and configuration information for log
archiving on the Service Processor.
Privileges
You must have
platadm
,
platop
or
fieldeng
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
If the
-e
option is not specified,
showarchiving
displays the following
information:
1. A list of archiving configuration data:
-e
Displays information about the last ten archiving errors.
-h
Displays usage statement.
When used with other options or operands, an error occurs.
-v
Specifies verbose output.
Archiving state
Log archiving is enabled or disabled.
Archive host
The host on which the logs are archived. Initial
value is
Not configured
. Possible values are
a host name or IPv4 address.
Archive directory
The directory on the archive host where the
archives are stored. Initial value is
Not
configured
.