Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 287 / 560

setprivileges(8)
System Administration 263
NAME
setprivileges - assign user privileges
SYNOPSIS setprivileges user [ privileges ] [ domainprivilege @ domains ]
setprivileges
-h
DESCRIPTION
setprivileges
(8) assigns privileges to an XSCF user.
setprivileges
modifies
only local privileges data. Multiple privileges are separated by one or more spaces.
There is a maximum of 100 unique users to whom privileges can be assigned. Each
of the 100 unique user can be assigned more than one privilege. A list of privileges
can be found in the OPERANDS section.
The privileges
domainop
,
domainmgr
, and
domainadm
must be assigned to a
specific domain. Other privileges do not have this ability. Refer to the OPERANDS
section and EXAMPLE 1 for details.
If no privileges are specified,
setprivileges
deletes any local privilege data for
the specified user. Subsequently, the user’s privilege data is looked up in
Lightweight Directory Access Protocol (LDAP), if LDAP privilege lookup is
enabled.
If the
none
privilege is specified, the specified user does not have any privileges,
regardless of privilege data in LDAP.
Privileges
You must have
useradm
privileges to run this command.
OPTIONS The following option is supported:
-h
Displays usage statement.
When used with other options or operands, an error occurs.