Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 259 / 560

setlookup(8)
System Administration 235
NAME
setlookup - enable or disable the use of the Lightweight Directory Access Protocol
(LDAP) server for authentication and privilege lookup
SYNOPSIS setlookup
-a
{
local
|
ldap
}
setlookup
-p
{
local
|
ldap
}
setlookup
-h
DESCRIPTION
setlookup
(8) sets whether authentication and privileges data are looked up in
LDAP or not.
Privileges You must have
useradm
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS
The following options are supported:
OPERANDS The following operands are supported:
EXAMPLES
EXAMPLE 1
Enabling LDAP Lookup of Privilege Data
-a
Sets the authentication lookup. Used with one of the
required operands
ldap
or
local
.
-h
Displays usage statement.
When used with other options or operands, an error
occurs.
-p
Sets privileges lookup. Used with one of the required
operands
ldap
or
local
.
ldap
Used with the
-a
and
-p
options. When set to
ldap
,
authentication or privileges are first looked up locally and then in
LDAP if not found locally. Verify that LDAP servers have been
correctly configured before executing
setlookup -a ldap
or
setlookup -p ldap
.
local
Used with the
-a
and
-p
options. When set to
local
,
authentication or privileges are looked up only locally.
XSCF>
setlookup -p ldap