Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 253 / 560

setlocale(8)
System Administration 229
NAME
setlocale - set the default locale of the XSCF
SYNOPSIS setlocale
-s
locale
setlocale
-h
DESCRIPTION The
setlocale
(8) command sets the default locale of the XSCF.
The locale that can be set is English or Japanese.
Privileges
You must have
platadm
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
■
The specified locale becomes effective after the subsequent login.
■
The currently set locale can be checked by using the
showlocale
(8) command.
EXAMPLES
EXAMPLE 1
Sets the XSCF default locale for English.
EXAMPLE 2
Sets the XSCF default locale for Japanese.
EXIT STATUS The following exit values are returned:
SEE ALSO showlocale
(8)
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-s
locale Specifies the default locale of the XSCF. Either of the following
can be specified for
locale :
C
Sets the locale for English.
ja_JP.UTF-8
Sets the locale for Japanese.
XSCF>
setlocale -s C
C
XSCF>
setlocale -s ja_JP.UTF-8
ja_JP.UTF-8
0
Successful completion.
>0
An error occurred.