Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 245 / 560

setldapssl(8)
System Administration 221
NAME
setldapssl - configure LDAP/SSL
SYNOPSIS setldapssl enable|disable
setldapssl loadcert [[-q] -{y|n}] [
-i
n ] [
-u
username ] [
-p
proxy [
-t
proxy_type ]]
URI
setldapssl loadcert [[-q] -{y|n}] [
-i
n ] console
setldapssl rmcert [[-q] -{y|n}] [
-i
n ]
setldapssl group administrator
-i
n name [ groupname ]
setldapssl group operator
-i
n name [ groupname ]
setldapssl group custom
-i
n name [ groupname ]
setldapssl group custom
-i
n roles [ privileges ]
setldapssl userdomain
-i
n [ domainname ]
setldapssl defaultrole [ privileges ]
setldapssl timeout seconds
setldapssl server [
-i
n ] [ ipaddr [: port ]]
setldapssl logdetail none|high|medium|low|trace
setldapssl log [[-q] -{y|n}] clear
setldapssl strictcertmode|usermapmode enable|disable
setldapssl usermap attributeInfo|binddn|bindpw|searchbase [ value ]
setldapssl default [-q] -{y|n}]
setldapssl
-h
DESCRIPTION
setldapssl
(8) configures LDAP/SSL. To enable or disable LDAP/SSL, execute
only the command and one of those operands. To enable or disable LDAP/SSL
strictcertrmode or usermapmode, specify the mode along with enable or disable.
To clear or unset a property, issue a
setldapssl
command with no value for the
operand. For example,
setldapssl group custom -i 1 name
clears the name
property from custom group 1, and
setldapssl usermap searchbase
clears
the searchbase property from the optional user mapping settings. If a property is
not set, it is displayed with no value.
Privileges
You must have
useradm
privileges to run this command.
Refer to
setprivileges
(8) for more information.