Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 231

Page: 231 / 560

sethostname(8)

System Administration

207

NAME

sethostname - set a host name and a DNS domain name for an XSCF unit

SYNOPSIS

sethostname

xscfu hostname

sethostname

-d

domainname

sethostname

-h

DESCRIPTION

sethostname

(8) command sets a host name and a DNS domain name for an XSCF

unit.

In M8000/M9000 servers, the DNS domain name becomes common to XSCF units.
The host name can be specified for each XSCF unit.

Privileges

You must have

platadm

privileges to run this command.

Refer to

setprivileges

(8) for more information.

OPTIONS

The following options are supported:

-d

domainname

Specifies a DNS domain name to be set for the XSCF unit. The

domainname

is specified in up to 254 characters with the

hostname

included, with label elements delimited by a "

" (period). If a

domain name exceeding 254 characters is specified, an error
occurs. A label element can contain alphanumeric characters and
"

". Each label element must always begin with an alphabetic

character and end with an alphanumeric character. If
"

localdomain

" specified, an error occurs.

-h

Displays usage statement. When used with other options or
operands, an error occurs.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 231 / 560

Search results

Summary of Contents for SPARC Enterprise M3000

Reviews: