manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 121 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 121

man(1)

System Administration

97

NAME

man - display manual pages of specified XSCF shell command 

SYNOPSIS

man

 

 command_name 

...

man

 

-h

DESCRIPTION

man

(1) displays manual pages of specified XSCF shell command.

Privileges

No privileges are required to run this command.

Refer to 

setprivileges

(8) for more information.

OPTIONS

The following option is supported;

OPERANDS

The following operand is supported:

EXTENDED

DESCRIPTION

■

If the relevant manual page is too long, the page is divided into pages that each 
can fit on one screen. In such cases, the following key operations are available:

■

If 

intro

 is specified for 

command_name

, a list of XSCF shell commands is 

displayed.

EXAMPLES

EXAMPLE 1

Displays the manual page of the addboard(8) command.

EXAMPLE 2

Displays a list of XSCF shell commands.

-h

Displays usage statement. When used with other options or 
operands, an error occurs.

command_name

Specifies the command name whose manual page is displayed. 
Multiple 

command_name 

can be specified by delimited the spaces.

Key

Description

Enter

Displays the next line.

space

Displays the next page.

b

Goes back half a page.

q

Quits display of the page in the manual.

XSCF> 

man addboard

XSCF> 

man intro

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments