Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 111 / 560

ioxadm(8)
System Administration 87
NAME
ioxadm - manage External I/O Expansion Units and add-in cards that contain
Energy Storage Modules and are attached to the host system
SYNOPSIS ioxadm [
-f
] [
-p
] [
-v
] [
-M
] env [
-e
] [
-l
] [
-t
] [ target [ sensors ]]
ioxadm [
-f
] [
-p
] [
-v
] [
-M
] lifetime [ target |
-z
target ]
ioxadm [
-f
] [
-p
] [
-v
] [
-M
] list [ target ]
ioxadm [
-f
] [
-p
] [
-v
] [
-M
] locator [on|off] [ target ]
ioxadm [
-f
] [
-p
] [
-v
] [
-M
] poweroff target
ioxadm [
-f
] [
-p
] [
-v
] [
-M
] poweron target
ioxadm [
-f
] [
-p
] [
-v
] [
-M
] reset target
ioxadm [
-f
] [
-p
] [
-v
] [
-M
] setled [ on|off|slow|fast] target led_type
ioxadm
-h
DESCRIPTION
ioxadm
(8) manages External I/O Expansion Units, link cards, and cards that
contain Energy Storage Modules (ESM) and are attached to the host system.
The M3000 server does not support External I/O Expansion Units.
When using this utility you must specify an operand, and any options that operand
requires. The target device can be a card mounted in a built-in PCI slot in the host
system; an External I/O Expansion Unit; or a field replaceable unit (FRU) in an
External I/O Expansion Unit. The card in the host system is identified by a string
that specifies the host path to the card. A linkcard installed in the host system is
called a downlink. A linkcard installed in an I/O Expansion Unit boat is called an
uplink.
For more information, see target in OPTIONS.
Privileges You must have one of the following privileges to run these commands:
Refer to
setprivileges
(8) for more information.
Required Privileges Operands
platop env
,
list
platadm env
,
list
,
locator
,
poweroff
,
poweron
fieldeng
All operands