![Fujitsu SOFTUNE F2 MC-16 User Manual Download Page 128](http://html.mh-extra.com/html/fujitsu/softune-f2-mc-16/softune-f2-mc-16_user-manual_118473128.webp)
114
CHAPTER 2 DEPENDENCE FUNCTIONS
2.2.8.6
Specify Displaying Trace Data Start
It is possible to specify from which data in the trace buffer to display. To do so, specify a
frame number with the SHOW TRACE command in the single trace mode, or specify
either a global number, or a block number and local number with the SHOW MULTITRACE
command in the multi trace mode. A range can also be specified.
■
Specifying Displaying Trace Data Start
It is possible to specify from which data in the trace buffer to displays. To do this, specify a frame number
with the SHOW TRACE command in the single trace, and specify either a global number, or a block number
and local number with the SHOW MULTITRACE command in the multi trace. A range can also be
specified.
[Example]
- In Single Trace Mode
>SHOW TRACE/CYCLE -6
: Start displaying from frame -6
>SHOW TRACE/CYCLE -6..10
: Display from frame -6 to frame 10
>SHOW TRACE -6
: Start displaying from step -6
>SHOW TRACE -6..10
: Displays from step -6 to step 10
Note:
A step number can only be specified when the MCU execution mode is set to the debugging mode.
- In Multi trace
>SHOW MULTITRACE/GLOBAL 500
: Start displaying from frame 500 (Global number)
>SHOW MULTITRACE/LOCAL 2
: Displaying block number 2
>SHOW MULTITRACE/LOCAL 2,-5..5
: Display from frame -5 to frame 5 of block number 2
Summary of Contents for SOFTUNE F2 MC-16
