SK-MB9EF120-002,-003
EU-Konformitätserklärung / EU declaration of conformity
UG-9E0010-11
- 28 -
© Fujitsu Semiconductor Europe GmbH
9 EU-Konformitätserklärung / EU declaration of conformity
Hiermit erklären wir,
Fujitsu Semiconductor Europe GmbH, Pittlerstrasse 47, 63225 Langen, Germany
dass dieses Board aufgrund seiner Konzipierung und Bauart sowie in den von uns in
Verkehr gebrachten Ausführung(en) den grundlegenden Anforderungen der EU-Richtlinie
2004/108/EC „Elektromagnetische Verträglichkeit“ entspricht. Durch eine Veränderung des
Boards (Hard- und/ oder Software) verliert diese Erklärung ihre Gültigkeit!
We,
Fujitsu Semiconductor Europe GmbH, Pittlerstrasse 47, 63225 Langen, Germany
hereby declare that the design, construction and description circulated by us of this board
complies with the appropriate basic requirements according to the EU Guideline
2004/108/EC entitled ’Electro-Magnetic Compatibility’. Any changes to the equipment
(hardware and/ or software) will render this declaration invalid!
Note:
All data and power supply lines connected to this starter kit should be kept as short as
possible, with a maximum allowable length of 3m. Shielded cables should be used for data
lines. As a rule of thumb, the cable length used when connecting external circuitry to the
MCU pin header connectors for example should be less than 20cm. Longer cables may
affect EMC performance and cause radio interference.
This evaluation board is a
Class A
product according to EN61326-1. It is intended to be
used only in a laboratory environment and might cause radio interference when used in
residential areas. In this case, the user must take appropriate measures to control and limit
electromagnetic interference.
