Fujitsu Siemens AMILO Si 3655, Getting Started

Page: 12 / 86

Preparing your notebook for use
Switching the notebook on for the fi rst time
Switching onforthe fi rsttime
We recommend that the notebook is supplied with power through
the mains adapter during this procedure.
When you switch your notebook on for the fi rst time, the supplied software
is installed and con fi gured. Because this installation procedure must not be
interrupted, you should set aside enough time for it to be fully completed and
connect the notebook to the mains outlet using the mains adapter.
During installation, the notebook must only be rebooted when you are requested to do so!
You will be prompted to create a backup copy of the pre-installed operating system. This
backup copy can be used later to restore your notebook to its delivery con
fi guration.
You can fi nd information on how to restore the operating system, drivers, manuals
and special software in the Recovery Process manual.
Your operating system is pre-installed on the hard disk to help you when you
start using your notebook for the
fi rst time.
1
► Switch on the notebook (1).
► During installation, follow the on-screen instructions.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will fi nd additional
information on the system and drivers, help programmes, updates, manuals etc. on
your notebook or on the Internet under "www.fujitsu-siemens.com/support".
6 - English 10600962235, edition 1