SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
56
12. Security
Port Security
Port Security Global Settings
This window is used to view and configure the port security global settings. Port Security is a security feature that
prevents unauthorized computers (with source MAC addresses) unknown to the Switch prior to locking the port (or
ports) from connecting to the Switch's locked ports and gaining access to the network.
Figure 12-1 Port Security Global Settings
The fields that can be configured are described below:
System Maximum Address:
Enter the maximum number of secure MAC addresses allowed. If not specified, the
default value is
No Limit
. The valid range is from 1 to 6656. Tick
No Limit
to allow the maximum number of secure
MAC address.
Click
Apply
to accept the changes made for each individual section.
Port Security Port Settings
This window is used to view and configure the port security port settings.
Figure 12-2 Port Security Port Settings
The fields that can be configured are described below:
From Port / To Port:
Select the appropriate port range used for the configuration here.
State:
Enable or disable the port security feature on the port(s) specified.
Maximum:
Enter the maximum number of secure MAC addresses that will be allowed on the port(s) specified. This
value must be between 0 and 64. By default, this value is 32.
Violation Action:
Select the violation action that will be taken here. Options to choose from are
Protect
,
Restrict
,
and
Shutdown
.
Protect -
Drop all packets from the insecure hosts at the port-security process level, but does not increment
the security-violation count.
