SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
45
IGMP Snooping Groups Settings
This window is used to configure and view the IGMP snooping static group, and view IGMP snooping group.
Figure 9-22 IGMP Snooping Groups Settings
The fields that can be configured are described below:
VID:
Enter a VLAN ID of the multicast group.
Group Address:
Enter an IP multicast group address.
From Port / To Port:
Select the appropriate port range used for the configuration here.
VID:
Click the radio button and enter a VLAN ID of the multicast group.
Group Address:
Click the radio button and enter an IP multicast group address.
Click
Apply
to accept the changes made.
Click
Delete
to remove the specified entry.
Click
Find
to locate a specific entry based on the information entered.
Click
Find All
to view all the entries.
Enter a page number and click
Go
to navigate to a specific page when multiple pages exist.
IGMP Snooping Mrouter Settings
This window is used to configure the specified interface(s) as the multicast router ports or as forbidden to be multicast
router ports on the Switch.
Figure 9-23 IGMP Snooping Mrouter Settings
The fields that can be configured are described below:
