SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
27
Figure 8-6 SNMP Community Table Settings
The fields that can be configured are described below:
Key Type:
Select the key type for the SNMP community. Options to choose from are
Plain Text
and
Encrypted
.
Community Name:
Enter an alphanumeric string of up to 32 characters that is used to identify members of an SNMP
community. This s
tring is used like a password to give remote SNMP managers access to MIB objects in the Switch’s
SNMP agent.
View Name:
Enter an alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that
a remote SNMP manager is allowed to access on the Switch. The view name must exist in the SNMP View Table.
Access Right:
Select the access right here. Options to choose from are
Read Only
, and
Read Write
.
Read Only -
SNMP community members using the community string created can only read the contents of the
MIBs on the Switch.
Read Write -
SNMP community members using the community string created can read from, and write to the
contents of the MIBs on the Switch.
Click
Add
to add a new entry based on the information entered.
Click
Delete
to remove the specified entry.
SNMP Group Table Settings
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in
the previous window.
Figure 8-7 SNMP Group Table Settings
The fields that can be configured are described below:
Group Name:
Enter the group name of a maximum of 32 characters. The syntax is general string that does not allow
space.
User-based Security Model:
Select the security model here. Options to choose from are
SNMPv1
,
SNMPv2c
, and
SNMPv3
.
SNMPv1 -
Select to allow the group user to use the SNMPv1 security model.
