8.
Notes for Cascaded Connections
When creating cascaded connections with a previous model device (FS-104 or FS-108), make
sure to set this device as a master.
When creating cascaded connections with Fujitsu advanced model (FS-1004, FS-1008 or
FS-1016), connect FS-1004EX at the slave side. (The OSD function will be effective.)
Use 1.8m dedicated PS/2 cables. Also, there are function limitations, as stated below.
<Example of cascaded connection>
Slaves
Master
FS-104AT or
FS-1004EX
FS-108AT or
FS-1004EX
FS-1004EX
FS-108AT or
FS-1004EX
FS-104AT or
FS-1004EX
1. Function Limitation (When the slave side is FS-104 or FS-108)
A. Switching cannot be done directly by pressing the SELECT key of the slave side. First,
with the SELECT key of the master side, switch to the port connected to the slave side.
B. The monitor setting data cannot be saved in the slave side. To use the PnP function of the
monitor, boot with the PC already selected. If not, disable the automatic PnP recognition
(from the PC).
12
Summary of Contents for SERVIS EX FS-1004EX
Page 15: ...Note ...
Page 16: ...NC14004 L530_01 This manual is made of recycled paper ...