[Hyper-V]
When a virtual machine with a network adapter that has never been started before is linked with an L-Server, the MAC address the L-
Server uses on the network might be set to "00:00:00:00:00:00". In that case, cancel the link between the virtual machine and L-Server
and assign a static MAC address to that virtual machine using VM management software, or start the virtual machine, wait for 3 minutes,
and then create the link with the L-Server.
For a virtual L-Server linked with a configured virtual machine, a hyphen ("-") is displayed for [Usage] in the [Disk Information] displayed
on the [Resource Details] tab on the ROR console.
[Solaris Zones]
-
When the cap values of CPU/memory of a virtual machine linked with an L-Server have not been specified, a different method is used
for calculating the number of possible L-Servers.
For details on the calculation method, refer to "
Max. Number of Possible L-Servers View
".
-
When importing a Solaris Zone related to an L-Server into L-Platform management functions, it is necessary to add NIC information
to the L-Server. Create a network resource if necessary, and then add NIC information.
[OVM for SPARC]
-
For details on the CPU performance and the number of CPUs, refer to "Display of CPU Performance and the Number of CPUs for L-
Servers" in "C.8.5 Advisory Notes for OVM for SPARC Usage" in the "Setup Guide CE".
-
When importing an L-Server into L-Platform management functions, it is necessary to add NIC information to the L-Server. Create
a network resource if necessary, and then add NIC information.
18.5 Changing Configuration
This section explains how to change configurations of L-Servers linked to configured physical servers or virtual machines.
For details on configuration changes, refer to "
".
From the command-line, execute rcxadm lserver modify.
For details on the rcxadm lserver modify command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
Note
Disks cannot be attached to or detached from L-Servers which cannot operate storage, nor can the disk capacity be increased.
In the following cases, the configuration of L-Servers cannot be changed.
-
When the non-global zone of Solaris Zones is not managed using BMC BladeLogic Server Automation
-
In the case of a Solaris 11 non-global zone created in Solaris Zones
-
In the case of OVM for SPARC virtual machines
18.6 Releasing an L-Server
This section explains how to revert the link between an L-Server and a configured physical server or virtual machine.
Use the following procedure to release the link to an L-Server.
1.
Right-click the target L-Server in the orchestration tree, and select [Revert] from the popup menu.
The confirmation dialog is displayed.
2.
Click <OK>.
The link between the L-Server and the configured physical server or virtual machine can be reverted.
From the command-line, execute rcxadm lserver revert.
For details on the rcxadm lserver revert command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
However, for L-Servers created using Resource Orchestrator, the link between the L-Server and a physical server or virtual machine cannot
be reverted.
- 243 -
