Information
When a cloning image is specified, the sizes of system disks of virtual L-Servers will be changed into the size of when the cloning
image was deployed.
When deploying cloning images, the OS image included in a cloning image is used, but the values of CPU, memory and network are
overwritten with the values used when creating an L-Server. Only system disks are deployed.
Note
When using a Windows image for multiple languages (English/Japanese Language Pack), manually select the language version when
deploying the cloning image.
[Solaris Zones]
L-Servers cannot be created with [Do not deploy] specified in [Image deployment].
Resource allocation
When creating an L-Server for which only a configuration definition exists, check the [None (Definition only)] checkbox.
When allocating resources for an L-Server for which only a configuration definition was created, refer to "
Network (NIC)
If [None] is specified in [Template], the <Add> and <Delete> buttons are displayed.
Clicking <Add> adds a network.
Perform settings based on the physical server the L-Server will be located on.
Clicking <Delete> deletes the network in the last line of the list.
Label (Optional)
Enter a label for the L-Server.
Enter a maximum of 32 characters.
Comment (Optional)
Enter any comments for the L-Server.
Enter a maximum of 256 characters.
16.3.2 [Server] Tab
VM type
Select the VM type for the L-Server to be created.
It is not necessary to specify this when deploying an image, because the VM type of the image is used.
Number of CPUs
Enter the number of server CPUs to allocate to the L-Server. Enter an integer between 1 and 8.
[OVM for x86]
The range that can be entered differs depending on the OS type of VM guests.
-
Windows
An integer between 1 and 8
-
Linux
An integer between 1 and 32
[Hyper-V]
Enter an integer between 1 and 4.
- 182 -
