manualshive.com logo in svg

Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation, User Manual

The Operation Manual for Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 is now available for free download from our website. Obtain in-depth knowledge of this powerful product's operation, features, and functionalities to maximize efficiency and streamline cloud resource management. Enhance your experience with the comprehensive manual accessible at manualshive.com.

Share
Download
background image

-

If a type other than [Admin LAN] is selected.

Enter up to 32 characters beginning with an alphanumeric character (upper or lower case), and including alphanumeric
characters (upper or lower case), underscores ("_"), periods ("."), or hyphens ("-").

Type

Set the network resources type to create using the following option buttons:

When creating the public LAN, a network resource name and a VLAN ID must be entered.

When creating a network resource for the admin LAN, a network resource name, a VLAN ID, a subnet address, and a subnet
mask must be entered.

When creating a network resource for iSCSI boot, a network resource name, a VLAN ID, a subnet address, and a subnet mask
must be entered.

-

Public LAN

-

Admin LAN

-

iSCSI boot

Detail configuration

Make settings to suit usage.

-

Use configured virtual switches.

Select this checkbox to use a virtual switch that was set up beforehand.

Clear this checkbox if VLAN auto-configuration is to be used for the external port of the LAN switch blade.

-

Automatically configure VLANs for the uplink ports

Select this checkbox if VLAN auto-configuration is to be used for the external port of the LAN switch blade.

VLAN ID/Uplink port settings

Perform the settings for VLAN IDs and uplink ports.

VLAN ID

Specify the VLAN ID to allocate to the LAN switch blade and virtual switch. Select a VLAN ID allocated to the uplink port
of the LAN switch blade, or enter a number. Specify a pre-designed VLAN ID.

Enter an integer between "1" and "4094".

-

For external networks including blade servers

Select the VLAN ID of an uplink port.

-

For internal networks or external networks with rack mount servers only:

Enter a VLAN ID.

Specifying VLAN IDs and clicking <Setting> displays the [Define VLAN ID/Uplink port settings] dialog.

Uplink port settings (Chassis/LAN Switch/Position/Port/LAG Name) (Optional)

If you connect an external network to an L-Server, perform the settings for the internal ports and virtual switches of the LAN
switch blade to enable communication for the specified ports.

Information for an uplink port consists of the following information.

-

Chassis name

Displays the chassis name for the external connection port.

-

LAN Switch

Displays the switch name for the external connection port.

-

Location to mount

Displays the slot number in the chassis for the external connection port.

- 140 -

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Acer AO533 Driver Installation preview
AO533
Brand: Acer Pages: 4
IBM E02HRLL-G - WebSphere Partner Gateway... Administration Manual preview
E02HRLL-G - WebSphere Partner Gateway...
Brand: IBM Pages: 268
Olympus CAMEDIA Master Software Installation Manual preview
CAMEDIA Master
Brand: Olympus Pages: 2
MACROMEDIA COLDFUSION 5-DEVELOPING Develop Manual preview
COLDFUSION 5-DEVELOPING
Brand: MACROMEDIA Pages: 438
Intrinsyc Telephony Modem Simulator Brochure preview
Telephony Modem Simulator
Brand: Intrinsyc Pages: 2
Hollow Sun Vox Continental Instructions Manual preview
Vox Continental
Brand: Hollow Sun Pages: 9
YASKAWA XTRAWARE - V3.0 Manual preview
XTRAWARE - V3.0
Brand: YASKAWA Pages: 263
DivX 10 User Manual preview
10
Brand: DivX Pages: 59
VMware VSHIELD APP 1.0.0 UPDATE 1 - API Admin Manual preview
VSHIELD APP 1.0.0 UPDATE 1 - API
Brand: VMware Pages: 144
Hasselblad PHOCUS Manual preview
PHOCUS
Brand: Hasselblad Pages: 6
beat buddy MANAGER Manager Manual preview
MANAGER
Brand: beat buddy Pages: 33
Red Hat ENTERPRISE LINUX 4.5.0 - Reference Manual preview
ENTERPRISE LINUX 4.5.0 -
Brand: Red Hat Pages: 434
pagertec DELUX Installation Instructions Manual preview
DELUX
Brand: pagertec Pages: 16
Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Installation Manual preview
ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5
Brand: Novell Pages: 76
Waves The King's User Manual preview
The King's
Brand: Waves Pages: 16
Blackberry CHALK PUSHCAST PLAYER User Manual preview
CHALK PUSHCAST PLAYER
Brand: Blackberry Pages: 27
Samsung SCX 6322DN - B/W Laser - All-in-One Manual preview
SCX 6322DN - B/W Laser - All-in-One
Brand: Samsung Pages: 40
MACROMEDIA COLDFUSION 5 - INSTALING AND CONFIGURING SERVER Manual preview
COLDFUSION 5 - INSTALING AND CONFIGURING SERVER
Brand: MACROMEDIA Pages: 160

Brands by name

Popular brands

Load more brands