Fujitsu ScanSnap S500 Operator'S Manual Download

Page: 21 / 201

1.2 Names and Functions of Parts

ScanSnap S500 Operator's Guide

Before Y

ou S
tart Using Y

our Scanner

1.2

Names and Functions of Parts

This section describes the names of parts and their functions.

■

Front Side

HINT

You can also use the scanner without the Stacker.

Paper chute

Open the cover to use the scanner.

⇒

Opening the cover turns on the scanner.

ADF

(ADF:Automatic Document Feeder)

Paper chute

After opening it, load the documents to be
scanned on this unit.

Side guide

Adjust the side guides to the width of
documents so that the scanned images will
notbe skewed.

Cover open lever

To open the ADF, pull this lever

towards you.

Operation button

⇒

Refer to the next page.

Stacker

Before using the stacker, unfold and extend it as shown above.

Summary of Contents for ScanSnap S500










































































































































































































Search results

Summary of Contents for ScanSnap S500

Reviews:

Related manuals for ScanSnap S500

Brands by name

Popular brands

Fujitsu ScanSnap S500, Operator'S Manual

Search results

Summary of Contents for ScanSnap S500

Reviews:

Related manuals for ScanSnap S500

Brands by name

Popular brands