How to Install the Software
When you insert the Setup DVD-ROM into the DVD-ROM drive on your computer, the [ScanSnap
Setup] window appears.
ATTENTION
l
Do not connect the ScanSnap to the computer before installing the software. Doing so may cause
the ScanSnap not to be recognized by the computer. In that case, install the software, and then
reconnect the ScanSnap to the computer.
l
If a DVD-ROM drive is not available, the installers for the software programs can be downloaded
from the following web page.
http://scansnap.fujitsu.com/g-support/en/
The functions of each button in the [ScanSnap Setup] window are as follows.
Button
Function
Readme
Displays the [Readme] window. You can refer to the Readme file of each software in
this window.
Install Products
Displays the [Install Products] window. You can start installing software.
Manuals
Displays the [Manuals] window. You can refer to Safety Precautions, Getting Started,
the Basic Operation Guide (this manual), and the manual of each software program in
this window.
Browse DVD Contents
Opens Windows Explorer to display the files from the Setup DVD-ROM.
Support
Displays contact information for customer support.
How to Install the Software
40
