Fujitsu ScanSnap iX500 Operator'S Manual Download

Page: 74 / 485

System Requirements

Mac OS

: It is recommended to apply the latest updates to the Mac OS.

Operating
system (*)

OS X v10.8 (Recommended: 10.8.1 or later)
Mac OS X v10.7 (Recommended: 10.7.4 or later)
Mac OS X v10.6 (Recommended: 10.6.8)

CPU

Intel

Core™2 Duo 2.4 GHz or higher

(Recommended: Intel

Core™ i5 2.5 GHz or higher)

Memory

2 GB or more (Recommended: 4 GB or more)

Display
Resolution

1024 × 768 pixels or higher

Hard disk
space

Free space required to install the software bundled with the ScanSnap is as follows:

ScanSnap Manager: 980 MB

CardMinder: 570 MB

ABBYY FineReader for ScanSnap: 590 MB

ScanSnap Online Update: 10 MB

ABBYY FineReader Express: 220 MB

Evernote for Mac: 80 MB

USB port

USB 3.0 / USB 2.0 / USB 1.1

ATTENTION

If the system requirements above are not satisfied, the ScanSnap may not operate.

Do not use the USB port on the keyboard or the monitor to connect the ScanSnap (it may not function
properly).

Make sure to use a powered hub equipped with an AC adapter if you are using a commercially
available USB hub.

Scanning speed will slow down in the following cases:
-

The CPU or the memory does not meet the required specifications

The version of the USB port or the USB hub is USB 1.1

A disk space approximately three times larger than the resulting scanned file size is required when
scanning documents.

Summary of Contents for ScanSnap iX500






































































































































































































































































































































































































































































































Search results

Summary of Contents for ScanSnap iX500

Reviews:

Related manuals for ScanSnap iX500

Brands by name

Popular brands

Fujitsu ScanSnap iX500, Operator'S Manual

Search results

Summary of Contents for ScanSnap iX500

Reviews:

Related manuals for ScanSnap iX500

Brands by name

Popular brands