Fujitsu ScanSnap iX100, Basic Operation Manual

Page: 271 / 514

Documents to Scan (SV600)
The following documents can be scanned because the scanning unit does not touch the documents.
l Thick documents, such as books
l Documents that you want to keep intact, such as photographs and handwritten illustrations
Conditions for Documents to Scan
Document type Flat documents, such as office paper,
postcards, and business cards Thick documents, such as books
Document
thickness 5 mm (0.2 in.) or less 5 to 30 mm (0.2 to 1.18 in.)
Paper size Width: 25.4 to 432 mm (1 to 17 in.)
Length: 25.4 to 300 mm (1 to 11.8 in.) Width: 25.4 to 400 mm (1 to 15.7 in.)
Length: 25.4 to 300 mm (1 to 11.8 in.)
ATTENTION
l When you scan a glossy document, the scanned image may be affected as follows:
-
Part of the scanned image appears brighter or darker than the original
- Glare from the lamp is caught in the scanned image
l
If a document has wrinkles, curls, or folds, smooth it out before scanning. Otherwise, the scanned
image may be affected as follows:
-
The scanned image is distorted
- The scanned image is blurred
- Part of the document does not appear in the scanned image
l
When you scan irregular shaped documents that are not rectangular or square, the scanned
images are not corrected automatically.
HINT
You can show a confirmation message in the case of scanning documents that reflect lamp light
causing glare, such as glossy paper.
For details, refer to the ScanSnap Manager Help.
Scanning Documents with SV600
271