Fujitsu ScanPartner SP25, Operator'S Manual

Page: 106 / 164

Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
106
How to Load
Documents
Scanner
Overview
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Troubleshooting
Scanned images turn out elongated.
*1: "Consumables" refers to the brake roller and the pick roller.
Are the rollers clean?
No
Clean the rollers.
For details, refer to
"Chapter 5 Daily Care" (page 70) .
Yes
Do the documents meet the requirements described in
"Precautions" in
"Conditions" (page 42) ?
No
Use documents that meet the requirements.
For details, refer to
"2.3 Documents for Scanning" (page 42) .
Yes
Are the consumables
(*1)
worn out?
Yes
Check the consumable counters and replace them if necessary.
For details, refer to
"Chapter 6 Replacing the Consumables" (page 80) .
No
Have you adjusted the offset/vertical magnification?
No
In [Device Setting] of the Software Operation Panel, adjust the offset in feed
direction (vertical magnification).
For details, refer to
"Adjusting the Position to Start the Scan [Offset/Vertical
magnification Adjustment]" (page 132) .
Yes
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.