Fujitsu S500M - ScanSnap - Document Scanner, Operator'S Manual

Page: 22 / 131

6
2.1 Installing ScanSnap
"Installation" is the operation to copy the supplied program file or ScanSnap Manager to the hard
disk of your computer and create the environment for using ScanSnap on the computer.
■
Before Installing ScanSnap Manager
1. Before installing ScanSnap Manager, check the following system requirements.
■
Operating system
One of the following operating systems is required:
•
Mac OS X v10.2.8, v10.3, or v10.4
(
3
: Supported -: Not-supported)
*1 If you are using Macintosh based on Intel Processor, Adobe Acrobat will operate
through Rosetta. (Rosetta is software to run the existing Power-PC-based applica-
tions on the Intel-based Macintosh. It is a part of Mac OS X.)
*2 When the operating system you are using is Mac OS X v.10.2.8.
*3 There are some restrictions on the use of
Adobe Acrobat 7.0
.
■
Computer
•
Power PC
®
G4 processor 800MHz or higher
(recommended: Power PC
®
G5 processor 1.6 GHz or higher)
Intel
®
Core
TM
Solo or Duo Processor (recommended: Intel
®
Core
TM
Duo
Processor1.83GHz or higher)
•
USB port (USB 2.0/1.1)
■
RAM
•
128MB or more (recommended: 512MB or more)
Mac OS X
v10.1
Mac OS X
v10.2
*2
Mac OS X
v10.3
Mac OS X
v10.4
ScanSnap Manager -
3 3 3
Adobe Acrobat 7.0
*1 -
3
3
3
*3
ATTENTION
•
ScanSnap may not function if it is connected to a USB port for the keyboard or
the monitor.
•
If you need to use a commercially available USB hub, use a powered one that
comes with an AC adapter.
•
If you want to connect the scanner via USB 2.0, the USB port and Hub must
be USB 2.0-compliant. The scanning speed may slow down when the scanner
is connected using USB 1.1. Use the USB 2.0 port, if your computer has one.
•
If the CPU or the memory does not meet the requirements, the scanning
speed will slow down.