Fujitsu S1500 - ScanSnap Deluxe Bundle, Operator'S Manual, Page: 116 / 468

Actions (for Windows Users)
116
Using the Quick Menu
1.
Load a document in the ScanSnap.
For details about how to load documents, refer to "How to Load Documents" (page 32) .
2.
Press the [Scan] button on the ScanSnap to start a scan.
D The Quick Menu appears when the scanning is completed.
3.
Change the settings for [Scan to E-mail] (If you do not want to change
any settings, go to step
4. ).
1. Move the mouse cursor to the mark on the [Scan to E-mail] icon, and then select
the [Settings] menu.
D The [Scan to E-mail - Options] dialog box appears.
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap
setup dialog box.
For details about how to perform scanning by using the Quick Menu, refer to
"Using the Quick
Menu" (page 73) .
Up to ten files can be attached to an e-mail message.
When you scan more than one document with the scan settings shown below, multiple files
are created. Pay attention to the number of documents to scan:
z File format: JPEG (*.jpg)
z [Generate one PDF file per (n) page(s)] check box is selected